Publicité
Les langues disponibles
Les langues disponibles
STEP 4
• Place the blower unit into the opening and secure it to the
oven with the screws (3) from step 2. See Figure 11.
Figure 11
• Carefully match the exhaust opening location of the
microwave and attach the damper to the rear plate by sliding
it into the guides at the rear plate. See Figures 12,13.
Figure 12
Figure 13
Be sure that the damper hinge is on the top and the
damper swings free into the wall outlet.
E
All manuals and user guides at all-guides.com
Damper
C. Vertical Ventilation System
The unit is shipped assembled for recirculating.
STEPS 1 & 2
• A-1 Ventilation motor. See Section B, steps 1 and 2 for
access to the blower motor. Also, see Figure 8.
STEP 3
• Turn the blower unit so that the fan blade openings are
facing upward. See Figure 14.
After Turning
STEP 4
• Place the blower unit into the opening.
• Secure the Blower Motor Cover to the microwave oven with
the screw (1, 2 and 3) from step 1 and 2. See Figure 15.
• Remove the screw (4) for the Blower Motor Cover and save
screws. Remove the Cover Motor Hole from Blower Motor
Cover. See Figure 16-1.
6
Fan Blade Openings Facing Up
Back of Oven
Figure 14
Figure 15
4
Cover Motor Hole
Figure 16-1
Publicité
