Bremont ALT1-WT Manuel D'instructions page 7

CRown
Ensure that the crown is pushed in to prevent entry of water into the
mechanism.
sea wateR
Wash with fresh water following exposure to saline water.
shoCks anD Jolts
Avoid any heavy shocks to the watch.
magnetIC FIelDs
Avoid contact with electrical equipment and strong magnets such as
speakers, magnetic tablet case covers and radio alarm clocks.
temPeRatuRe
Keeping the watch in contact with wrist will help minimize any exposure
to extremes. Bremont recommend that you do not wear your watch near
hot water, for example in the shower, steam room or jacuzzi. Extreme
changes in temperature can cause moisture to permeate the seals and
cause condensation to form inside of the watch.
ChemICals
Wash with warm fresh water if it is exposed to solvents etc. to avoid
damage to seals and watch straps.
All manuals and user guides at all-guides.com
SERvICING
Every part of your watch has been carefully chosen from the best
selection of materials available. In spite of this, a number of parts will
always be subject to natural wear. It is therefore important that these
points of wear are always kept lubricated. We recommend that you have a
maintenance service carried out every 3 to 5 years.
Only a certified Bremont agent should carry out the servicing of a
Bremont watch. To find your nearest repair and service centre please
contact Bremont Watch Servicing on:
+44 (0) 845 0940 690 or email customerservice@bremont.com