Installation - LPG wellbox S Guide D'installation Et D'utilisation

GB

installation

Open the device by
pressing on the button
located in front.
To connect the hose to the machine, do as follows:
Then, you may connect the treatment head of your choice to the hose:
Insert the hose with the arrow
upwards, as indicated in the photo.
The connecting hose may be joined on either
side. To disconnect it, pull carefully. Never turn or
force the connecting hose.
Choose one of the heads and then connect it to the
hose by lining up the arrows on the head and hose.
Repeat this process whenever you want to change
the treatment head.
After use, the hose is easily stored by coiling it in
the designed area, as shown in the picture.
To increase the life expectancy of your flexible
hose, it recommended though not to leave it rolled
up during a prolonged period.
12
M I N C E U R & A N T I - Â G E
Store the four
treatment heads in the
locations specifically
designed for that
purpose. Each head's
dedicated storage area
is indicated with
a pictogram.
(in relief)