Télécharger Imprimer la page

Kohler K-702 Guide D'installation page 12

Publicité

Les langues disponibles

Les langues disponibles

Whirlpool
Framing
Alcove Installation
11. Complete the Finished Wall/Deck
If you have not already done so, carefully remove the protective tape from the whirlpool rim.
Cover the framing with water-resistant wall/deck material. Seal the joints between the whirlpool
rim edge and the water-resistant wall/deck material with silicone sealant.
Tape and mud the water-resistant wall/deck material. Install the finished wall/deck to the
water-resistant wall/deck material. Seal the joints between the whirlpool rim and the finished
wall/deck material with silicone sealant.
Install the faucet trim according to the instructions packed with the trim.
12. Complete the Concrete Installation
If you have not already done so, carefully remove the protective tape from the whirlpool rim.
Apply mortar and tile to the wall, deck and surround material as needed.
Apply a bead of sealant where the tile meets the whirlpool surface.
Install the faucet trim according to the instructions packed with the trim.
13. Clean-Up After Installation
When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the
whirlpool surface. If necessary, use warm water and a liquid detergent to clean the surface of the
whirlpool, user keypad and remote control.
Remove stubborn stains, paint, or tar with turpentine or paint thinner. Do not allow cleaners
containing petroleum distillates to remain in contact with any whirlpool surfaces for long periods
of time. Remove plaster by carefully scraping with a wood edge. Do not use metal scrapers, wire
brushes, or other metal tools. Use a powder-type detergent on a damp cloth to provide mild
abrasive action to any residual plaster.
1018963-2-C
All manuals and user guides at all-guides.com
Finished Wall
Material
Finished Deck
Material
Water-Resistant
Wall Material
Apply silicone sealant to
the edges of the water-
resistant wall material
and the finished wall.
Tiling-in Bead
Drop-In Installation
Apply silicone
sealant to the
edges of the water-
resistant deck
material and the
finished deck.
Water-
Resistant
Deck Material
Framing Material
Whirlpool
12
Wall Material
Tile
Whirlpool
Apply
sealant
Tile
Brick
Approved
Tile
Backing
Concrete Installation
Kohler Co.

Publicité

loading