Usage Notes & Warning; Warranty - EZA DEM200 Manuel D'utilisation

T. Usage Notes & Warning
1.Always make sure the blue plug of cable connect with the jump start socket tight in this
product before jumping start the vehicle. Otherwise, it will affect the results, even causing
the melt of the blue plug.
2.Always check if the jumper clamps are well connected, check if the vehicle battery
connector is rusted or dirty, clean it before jumping start the vehicle. DO NOT jump start
again after 3 attempts. Otherwise, it will damage the host. And check your vehicle if has
other trouble.
3.DO NOT disassemble the host. Otherwise, it may be dangerous!
Always take care when using this product
This product is not intended for use by young or infirm persons without supervision
Do not use as a toy
Do not allow this product to become wet
Do not immerse this product in water
Do not operate this product in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust
Do not modify or disassemble this product. Only a repair technician may repair this unit.
Do not expose this product to heat
Do not store in locations where the temperature may exceed 70°C. The advised storage
temperature is -10°C to 45°C
Charge only at ambient temperatures between 0°C and 40°C
Charge only using the charger provided with this product.
Under extreme conditions, battery leakage may occur.
Carefully wipe the liquid off using a cloth and avoid skin contact when you notice liquid on
the batteries. In case of skin or eye contact, rinse immediately with clean water and seek
medical attention
U. Warranty
The EZA DEM200 is guaranteed for a period of 12 months from the date of the purchase.
We may not cover damage caused by misusing the product.
18