Led Indicator Display While Charging The Dem200; Usb Adapter Charging Speed; How To Use The Dem200 - EZA DEM200 Manuel D'utilisation

P. LED Indicator Display While Charging the DEM200
LED Power Meter:
Charging
Q. USB Adapter Charging Speed
R. How to Use the DEM200?
o Jump start 12V vehicle Instruction (a. on diagram):
1. Make sure that the number of indicators is not less than 3 ones.
2. Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the
BLACK clamp to the vehicle's battery negative (-) terminal.
3. Plug the cord of jumper cable into the jump start socket.
4. Check indicator light on clamps, Green light means ready to go, then start the vehicle
(otherwise please check the connection).
First light blinking
First light on,second light blinking
Two lights on, third light blinking
Three lights on, fourth light blinking
Adapter Current
Output
5V/2.1A
5V/1.5A
5V/1A
5V/0.5A
15
LED Display
Four lights on
Charging Time
About 5 hours
6-7 hours
10-11 hours
About 24 hours
Battery Capacity
<25%
25%-50%
50%-75%
75%-99%
Fully charged