Publicité
TM
2.7 SLI
and Quad SLI
This motherboard supports NVIDIA
technology that allows you to install up to two identical PCI Express x16 graphics
cards. Currently, NVIDIA
TM
TM
Vista
/ Vista
64-bit / 7 / 7 64-bit OS. NVIDIA
®
TM
Windows
Vista
/ Vista
procedures in this section.
Requirements
1. For SLITM technology, you should have two identical SLITM-ready graphics
cards that are NVIDIA
have two identical Quad SLITM-ready graphics cards (dual-GPU on each
graphics card) that are NVIDIA
2. Make sure that your graphics card driver supports NVIDIA
technology. Download the driver from NVIDIA
(www.nvidia.com).
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system. It is recommended to use
NVIDIA
2.7.1 Graphics Card Setup
2.7.1.1 Installing Two SLI
Step 1.
Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version shall be the same.) Insert one graphics card
into PCIE1 slot and the other graphics card to PCIE3 slot. Make sure that
the cards are properly seated on the slots.
Step2.
If required, connect the auxiliary power source to the PCI Express
graphics cards.
22
Fatal1ty Z77 Professional-M Series Motherboard
TM
Operation Guide
®
TM
SLI
and Quad SLI
®
TM
SLI
technology supports Windows
®
TM
64-bit / 7 / 7 64-bit OS only. Please follow the installation
®
certifi ed. For Quad SLITM technology, you should
®
certifi ed.
®
certifi ed PSU. Please refer to NVIDIA
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
TM
(Scalable Link Interface)
®
XP / XP 64-bit /
TM
Quad SLI
technology support
®
TM
SLI
®
website
®
website for details.
®
certifi ed
Publicité
