Publicité
Les langues disponibles
Les langues disponibles
5. Insert cooktop into cutout
Insert the cooktop centered into the cutout opening. Make sure the front
edge of the countertop is parallel to the cooktop. Make final check that all
required clearances are met.
6. Attach hold-down brackets to cabinet
Open the cabinet door. Rotate the brackets to overlap with the underside of
the countertop. Then tighten the hex screw. Install the thumbscrew until it
touches the bottom of the countertop.
Bracket
Thumbscrew
Important
: Turn the thumbscrew until it touches the bottom of the countertop.
Do not overtighten.
Cooktop
Cooktop
Countertop
Cooktop Base
Hex Screw
support@thermomate.com
3330-A Marathon Ct Charleston, SC 29418
18
Publicité
