Publicité
Les langues disponibles
Les langues disponibles
Important:
The junction box must be located where it will allow considerable slack in the
conduit for serviceability.
MIN. from front edge of cutout and front edge of countertop.
2. Protect surface of cooktop
Place a towel or tablecloth onto the countertop. Lay the cooktop upside
down onto the protected surface.
3. Attach foam tape
Apply the foam tape around the outer edge of the glass. Do not overlap the
foam tape.
4. Locate mounting parts
On the underside of the cooktop, you will find the hex screws. Remove and
use these hex screws to mount the brackets at these two locations. Do not
tighten. Turn the bracket inward to avoid interference when dropping the
cooktop into the countertop.
1 (844) 334-4203
17
www.thermomate.com
Bottom of Cooktop
Cloth under Cooktop
Bottom of Cooktop
FoamTape
Foam Tape
Cooktop Glass
Hex Screws
Publicité
