Publicité
Les langues disponibles
Les langues disponibles
Click on "Next" to confirm installation. When the
progress bar is complete, click on "Close". A
shortcut will be created on the desktop:
"HT Communication Tool".
Importé par :
-45-
AIC International - 44980 Ste Luce sur Loire - France
Step 6: Recording data: Make sure the meter is on. It must
be switched on (ON) to be able to record data. Double click
on the icon for the software to open it (from the desktop
shortcut or the list of programmes).
Reconnect the CO2 meter to the PC (with the USB cable
supplied). Click on the "Connect" button, the
located at the top left or in the "Communication/ Connect"
menu: the CO2 meter is automatically recognised.
Set the parameters of the data to be recorded before starting
to record.
- 6.1 Click on "Set param" or communication/Set
Parameters. A window opens.
- 6.2 Complete the Address (numerical)
Serial number and Test Name fields.
- 6.3 Indicate the total number of readings to be recorded
(Total Records) and the time interval between each
reading (Interval). Select the interval unit in seconds
(Sec), minutes (Min) or hour (Hours).
Importé par :
AIC International - 44980 Ste Luce sur Loire - France
icon
-46-
Publicité
