Pioneer BCS-424 Mode D'emploi page 65

Software updating
The player's software can be updated using
one of the methods shown below.
• Connecting to the Internet.
• Using a disc.
• Using a USB flash drive.
Product information on this player is provided
on the Pioneer website. Check the website
shown on page 9 for update and service
information on your Blu-ray disc player.
Caution
• Do not unplug the power cord or remove the USB
flash drive/disc during software updating. Also, do
not reboot by pressing the  STANDBY/ON button
for 5 seconds or longer. Otherwise, the updating
will be aborted and malfunction may occur with
the player.
• There are two processes for software updating,
downloading and updating. Both processes may
take a certain period of time.
• Other operations are defeated during software
updating. Furthermore, updating process cannot
be canceled.
All manuals and user guides at all-guides.com
 Updating connecting to the Internet
1. Connect to the Internet.
2. When playback is stopped, display the
3. Select and set Initial Setup.
4. Select and set Options d Update d
5. Select and set Start.
6. Downloading of the software start.
7. Updating starts.
8. Updating completes.
Advanced settings
Note
y Depending on the Internet connection
conditions, downloading may take a long time.
y Steps 1 to 5 are the operations performed by
the user (they are intended to download the
software from the Internet).
y Steps 6 to 8 are the operations performed
(automatically) by the player (they are intended
to update the software).
Press HOME MENU.
Home Menu screen.
Use / to select, then press ENTER.
Network d Start.
Use / to select, then press ENTER.
Press ENTER.
The software download status is displayed
on the screen.
y Depending on the Internet connection
conditions, software downloading may
take a certain period of time.
y Software updating may take a certain
period of time.
This unit automatically restarts.
65
En
8