Maintenance And Care; Specifications; Troubleshooting; Before Returning For Repairs - Schumacher Electric SS-15A1-OB Manuel D'utilisation

A minimal amount of care can keep you
battery charger working properly for years.
• Clean the clamps each time you are
finished charging. Wipe off any battery fluid
that may have come in contact with the
clamps to prevent corrosion.
• Occasionally cleaning the case of the
charger with a soft cloth will keep the finish
shiny and help prevent corrosion.
Input Voltage ......................................................................................120V AC @ 60Hz, 3.4A
Output Voltage ................................................................................................... 12V batteries
Output Current Rating...........................................................................................15A @ 12V
PROBLEM
No LED light on the battery
type.
Charger is connected to AC
power, but no LED is on.
A loud clicking sound is
coming from the charger.
If these solutions do not eliminate the problem, or for more information
about troubleshooting, contact customer service for assistance:
services@schumacherelectric.com • www.batterychargers.com
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485. DO NOT SHIP
UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION (RMA) number from
Customer Service at Schumacher Electric Corporation.

MAINTENANCE AND CARE

SPECIFICATIONS

TROUBLESHOOTING

POSSIBLE CAUSE
No battery was selected.
Charger is not connected to
batteries.
Bad fuse on the leads.
Breaker is clicking because
you have bad battery
connection.

BEFORE RETURNING FOR REPAIRS

or call 1-800-621-5485
Monday-Friday 7:00
• Coil the input and output cords neatly when
storing the charger. This will help prevent
accidental damage to the cords and charger.
• Store the charger unplugged from the AC
power outlet in an upright position.
• Store inside, in a cool, dry place. Do not
store the ring terminals clipped together, on
or around metal, or clipped to the cables.
to 5:00 CST
am pm
• 6 •
REASON/SOLUTION
Press SELECT button until
the correct battery type is
blinking.
Connect charger to batteries.
Replace the fuse.
Check battery connections.