Bus Connection Of Ksf-Pro Controllers With Kms-D Or Kms-D; Bus Connection To Whms Controllers - OEG KSF-Pro Mode D'emploi

BUS CoNNECTIoN oF KSF-PRo CoNTRoLLERS wITh KMS-D oR KMS-D+

With BUS connection any number of KMS-D or KMS-D+ controllers can be connected to
network with KSF-Pro. The first or the master controller physically controls heat sources,
while the other (slave) controllers control only the heating circuits.
Important: Outdoor and boiler temperature sensors need to be connected to the master
controller.
Outdoor sensor
Heat source

BUS CoNNECTIoN To whMS CoNTRoLLERS

With BUS connection any number of KSF-Pro with WHMS controllers can be connected to
network. The first or the master controller physically controls heat sources, while the other
(slave) controllers control only the heating circuits.
Important: Outdoor and boiler temperature sensors need to be connected to the master
controller.
Outdoor sensor
Heat source
First controller
First controller
Expanding controller
Expanding controller
Scheme [360b]
73
Expanding controller
Expanding controller
Scheme [360b]
Installation manual