Table des Matières
Publicité
TOYOTA - HILUX 2018
INSTALLATION MANUAL
INSTALLATION SUPER BOLT
32
PRESS SUPER BOLTS STUDS
A
40-50 N/cm
2
ATTENTION
FULL SURFACE CONTACT IS CRITICAL FOR GOOD
ADHESION PERFORMANCE. ALWAYS APPLY FIRM
PRESSURE WHEN MOUNTING ADD ON PARTS AND
TAPES.
K
PRESS
SUPER BOLT STUDS
A full surface contact between tape and substrate is important for good adhesion performance.
Contact is achieved by applying pressure. In practice a pressure between 40 and 50 N/cm² is usually
needed and an application temperature between 25 and 45 °C or 77 and 113 °F is also necessary.
During application, add-on parts and tapes must have the similar temperature.
33
PLACE
USA 800 543 9276
DATE: 02.27.19
PG.
12
Publicité
Table des Matières
