Télécharger Imprimer la page

Publicité

Liens rapides

INT-SL
Copyright © 2007, FORTIN AUTO RADIO INC
DATA INTERFACE MODULE SELF-LEARNING FOR SECURITY SYSTEM AND / OR REMOTE STARTER.
WIRING / CONNECTION GUIDE
LED
START HERE
1
Make the connections of the INT-SL to the
vehicle:
Connector 1 (Black):
1.A
Determine the type of installation:
INSTALLATION WITH
INSTALLATION WITHOUT
Connector 2 (White):
(I) Locate the wiring type for the vehicle on the
1.B
VEHICLE FIT GUIDE (P.2)
(II) Make the connections associated with the vehicle in the
WIRING SCHEMATIC CONFIGURATION (P.3)
2
3
4
INSTALLATION WITH DATA-LINK
Plan 1
INSTALLATION WITHOUT DATA-LINK
Plan 2
Cut off one plug of the
Data-Link connector,
connect the red wire
to +12V and the black
wire to ground.
WEB
UPDATE
COMPATIBLE
ALL RIGHTS RESERVED
Lock
Unlock Driver 1
2
Ignition
(-) While running
Door trigger
Data OBD2
Bypass PK
3
(Type 3 only)
12V Battery (+)
1
Ground (-)
Data-Link
Data-Link
Connect wire to vehicle
INSTALLATION AND PROGRAMMATION INSTRUCTIONS
DATA-LINK (
See plan 1, below
)
DATA-LINK (See plan 2, below)
Press and hold the programming
button. Plug in the
connector 1
in the INT-SL interface.
The LED will turn on, indicating
the beginning of programming.
Plug the
connector 2
into the
INT-SL interface.
WARNING: Connector 2 can be easily
plugged in backwards.
Starter or alarm
Data Link Port
2
1
Starter or alarm
2
1
Lt. Blue/Black
Lt. Blue
White
White/
Pink
Pink/Black
Green
Blue
Orange
Orange/Black
~
Purple
Purple/White or Purple/Black
Yellow
Yellow/Black
WARNING: Connector 2 can be easily plugged in backwards.
Red
Black
Blue
White
Connect wire to Remote-Starter/Alarm
5
6
7
8
9
10
Red +12V
Black
INSTALLATION GUIDE
Made in Canada - Rev. E - 17 / 09 / 2008
W e b
s i t e :
h t t p : / / w w w . i f a r . c a
See wiring schematic configuration
Black
Unlock Driver 2
(Type 3 only)
OUTPUT
While holding the programming
button, turn the key to the ignition
position.
The LED will flash rapidly.
Release the programming button.
Chrysler vehicle go step 9
Start the vehicle with the key.
The LED will turn off.
Turn the key OFF.
The interface is programmed.
7
7 0 3 5 0 0 0 1 2 6
P.1
Trunk
Parking light
Futur Input
Tach
Data BCM
Bypass P 3
K
Manufactured under US patent No.:
5,719,551
6,011,460 B1
6,243,004 B1
6,249,216 B1
6,275,147 B1
6,529,124 B2
6,696,927 B2
6,756,885
B1 6,756,886 B2
6,771,167 B1
Canadian Patent No.:
2,320,248
2,415,023
Européen Patent No.:
1,053,128
INPUT
1

Publicité

loading

Sommaire des Matières pour Fortin INT-SL

  • Page 1 Connect wire to Remote-Starter/Alarm OUTPUT INPUT START HERE INSTALLATION AND PROGRAMMATION INSTRUCTIONS While holding the programming Make the connections of the INT-SL to the button, turn the key to the ignition vehicle: position. Connector 1 (Black): Determine the type of installation:...
  • Page 2 : h t t p : / / w w w . i f a r . c a Copyright © 2007, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED VEHICLE FIT GUIDE / GUIDE DES VOITURES...
  • Page 3 : h t t p : / / w w w . i f a r . c a Copyright © 2007, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED Interface de branchement Auto-Apprentissage pour Système de Sécurité et /ou Démarreur à distance.
  • Page 4 S i t e I n t e r n e t : h t t p : / / w w w . i f a r . c a Copyright © 2007, FORTIN AUTO RADIO INC TOUS DROITS RÉSERVÉS Interface de branchement Auto-Apprentissage pour Système de Sécurité...