Xerox WorkCentre 4118 Guide D'initiation Rapide page 34

quick_use.book Page 32 Thursday, March 2, 2006 9:38 AM
Machine Settings
1
Press the [Machine Status]
key on the Control Panel.
Using the Navigation Keys select [Machine Setup] and press [Enter].
2
Using the Navigation Keys select the required setup option and press
3
[Enter].
Using the Machine Setup Options table on the next page, customize the
4
settings to meet your requirements.
Press [Enter] to save your selections
Press [Menu/Exit] to exit each menu level and return to standby mode.
5
32
Enter Machine
Status