Servicing And Cleaning - Renson HOBO 34L Série Manuel D'installation De Mise En Service Et D'utilisation

We advise you to regularly check the clamping of fixing screws and connections of the pumping group as well as the clamping
of straps.
For the maintenance of the tank's shell, we recommend you the use of clear or slightly soapy water.
We remind you that the guarantee won't be applicable in case of tank's maintenance failure, as well as in case of
modifications made by the buyer either in the shape or destination. These engage the responsibility of the buyer who will
consequently not be able to invoke the benefits of guarantee. The guarantee will be refused if our controls reveal an unusual
use of the machine.
In order to provide you optimum safety and to keep your guarantee, we advise you to use the original parts. You can refer to
the exploded views available at our website :
5. Safety instructions, accident prevention and use of the pump
5.1 Before the installation and use, please read the following instructions

Gasoil pumps were built according to European directives concerning safety and hygiene.
 Despite this, the use of this product can be a danger if it isn't used according to the instructions.

Before tuning the machine on, please make sure that the necessary electrical safety means exist.

The aspirated liquid's temperature must not exceed 40°C.

Before any operation on the pump, remove the power plug.

Avoid direct contact between the pump and the liquid.

The pump should only be used with an electric cable fitting to the norms applied in the country.
 The user is responsible for the respect of local safety applied norms.

Any use other than those planned (other liquids, overfilling) or transformation (modification, non-original spare
part) could cause risks during the use ; It is considered as non-conform.
It is forbidden to use this pump for the transfer of explosive liquids as
gasoline or other fluids with a comparable flash point! (The motor and the
switch aren't explosion-proof) Or in an explosive environment or for the
transfer of AI, AII and B fuel.
5.2 The use of damaged accesories could provoke body injuries or material damages.

DNA and DNR flexibles shall not be bended, twisted or dilated.

During the use of the pump, you must absolutely avoid that tools suffer abrasion, cuts or other damages.
 Absolutely replace any damaged accesory

Fluid flowings can provoke pollution of the environnement. Respect the water services regulation as well as the
applicable regulation concerning the installation.

3. Servicing and cleaning

4. Maintenance
www.renson-intenational.fr in order to identify them.