Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. Installation of the tank
This installation manual is suitable for every HOBO tank model.
Before using the HOBO, it is recommended to fix it to the vehicle. In order to do so, the HOBO has been designed to be
strapped at the 4 corners; special places are dedicated to this. (example : report to the following drawing). Once the tank is
safely strapped to the vehicle, transportation will proceed with the valve and pump closed.
To usre the transfer group, you need to open the valve and action the pump.
Closing
valve
For the air transportation regulation, we are no longer allowed to put the safety sticker ourselves. Consequently, before any
use of the tank, please put the sticker on the tank as you can see on the following picture. This sticker is compulsory for
emergency services to intervene in case of need. The non-respect of this procedure discharges us from any responsibility.
Publicité
Table des Matières
