Circadiance SmartMonitor 2 Guide Des Parents page 27

Step 4: Connect the Lead Wires to the Electrodes.
Step 5: Attach the Electrodes to the Infant Belt.
•
Place the electrode belt on a flat surface.
•
Lay your baby on the belt so the belt is aligned with the baby's
nipples (see illustration).
•
Place the electrodes, Velcro-side down, on either side of the
belt as follows:
Place the electrode with the white lead wire on the baby's
right side.
Place the electrode with the black lead wire on the baby's
left side.
Setting Up the SmartMonitor 2
•
Insert the black LA lead wire into
one electrode.
•
Insert the white RA lead wire into the
other electrode.
•
Make sure the metal tips of the lead
wires are fully inserted into the
electrodes.
21