Carbon Brushes - EINHELL PROFI Silver Line PS-WS 960-125 Mode D'emploi

Anleitung PS-WS 960-125_SPK1
GB
Clean the tool with a damp cloth and some soft
soap. Do not use cleaning agents or solvents;
these may be aggressive to the tool's plastic
parts. Ensure that no water can get into the interi-
or of the tool.

8.2 Carbon brushes

The carbon brush should be replaced if it is shorter
than 7 mm. This work should only be carried out by a
qualified expert.
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.4 Ordering spare parts
Please provide the following information on all orders
for spare parts:
Model/type of tool
Article number of the tool
ID number of the tool
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
14
18.08.2005 16:32 Uhr Seite 14