Bosch DCU 220 Consignes D'utilisation page 12

en | 12 | 1 687 023 911 | Initial commissioning
3. Place the adapter plate together with the docking
station on the trolley in such a way that the slides
fit through the holes in the rail.
 Adapter plate and docking station can be
pushed to the left or right.
4. Use a screw (M5 x 10) to secure in the position
selected.
|
1 689 989 322 2021-01-24
5. Operation
!
Only use the power supply unit 1 687 023 776
included in the scope of delivery.
1. Connect the cables of the peripheral devices to the
corresponding ports at the docking station.
2. Connect the power supply unit to the docking
station.
 The power LED lights up.
3. DCU 220 align at the two tabs of the docking
station (see encircled part in the figure).
4. Push the lock to the right so that the two rear
guide pins engage into the recesses on the
DCU 220.
5. Put the key into the lock. Push key in and turn it to
engage the lock.
Robert Bosch GmbH