Product Description; Intended Use; Scope Of Delivery; Spare And Wearing Parts - Bosch DCU 220 Consignes D'utilisation

en | 10 | 1 687 023 911 | Safety Instructions
2. Safety Instructions
R
Do not touch the contacts of the docking
connection.
R
Never attempt to connect the DCU 220 to the
docking station if there are any objects between
the DCU 220 and the docking station. This may
cause damage to the DCU 220 or the docking
station.
R
Do not move the docking station while it is
connected to the DCU 220.
R
If the DCU 220 does not function while connected
to the docking station, switch off the DCU 220 and
disconnect it from the docking station. Connect
the power supply unit to the DCU 220 and check
whether the DCU 220 functions properly. If the
DCU 220 functions properly, a fault may be present
in the docking station.
R
Never place any metal objects or containers with
liquids on the docking station. There is a risk of
fire or electric shock if metal objects (e.g. paper
clip or coin) or liquids enter the docking station.
Immediately disconnect the power cord and remove
the DCU 220 from the docking station.
R
Disconnect the power supply unit and remove the
DCU 220 from the docking station if:
$
the docking station is damaged
$
smoke comes from the docking station
$
a strange smell is noticed
$
the docking station is unusually hot.
Using the docking station if any of the above
conditions apply may lead to fire or electric shock.
R
Always remove the DCU 220 properly from the
docking station. Improper undocking can result
in data losses during ongoing data transfers via
the docking station (e.g. to external servers).
To prevent this, the software must be prepared
prior to removal of the DCU 220 from the docking
station. Follow the steps for "Proper removal" in
the software documentation on DCU 220.
|
1 689 989 322 2021-01-24
3.

Product description

3.1

Intended use

This docking station must only be connected to the
Convertible PC DCU 220 and provides various ports to
facilitate stationary work.
The docking station is intended to be used with the
DCU 220 only.
3.2

Scope of delivery

Designation
Docking station
Power supply unit
Key
Original operating instructions
3.3

Spare and wearing parts

Designation
Power supply unit
Key
<)
Wearing part
<)
Order number
–
1 687 023 776
1 681 982 012
1 689 989 322
Order number
1 687 023 776
1 681 982 012
Robert Bosch GmbH