Publicité
Les langues disponibles
Les langues disponibles
Jaga Mini Canal PRO trench heater radiator:
Suitable for connection to traditional heating systems.
Consists of:
•
shaft with grid holder with stainless steel profile to allow continuous
grille appearance
•
anodized aluminium- or wooden grilles, BNA panel grille
•
2-pipe Low-H2O heat exchanger
•
metal cover to shield the hydraulic connections, provided with an-
thracite grey epoxy-polyester RAL 7024
•
cover plate in fibreboard, thickness 22 mm. Protects the duct
against contamination and damage during construction works.
Infloor trench heating radiator, made of Sendzimir galvanized steel
plate of 1 mm thick, provided with anthracite grey epoxy-polyester
RAL 7024, gloss level 10%. The head piece is removable for easy
mutual coupling of the convector ducts. The shaft has pre-perforated
holes to lead through the hydraulic tubes. Black sealing plastic plugs
are included.
•
the coating is a scratch resistant epoxy-polyester powder, sprayed
electro-statically and baked at a temperature of 200 °C. UV-resist-
ant due to ASTM G53
Heating capacity according to EN 442.
Heat exchanger:
The heat exchanger is manufactured from round, seamless circulation
tubes of pure red copper, with pure aluminium fins and two brass col-
lectors for left or right 1/2" same end connection;
For double-sided connection 1/2", only for heat exchanger type 04
Mounting: on the side (window side) of the shaft. Air vents 1/8" and
drain cocks 1/2" are included.
•
the heat exchanger is electro-statically lacquered with anthracite
grey epoxy-polyester RAL 7024., gloss 70%
•
pressure test: 20 bar
•
working pressure: 10 bar
BNA Aluminium anodized floor grille
Grille panel: L 360 mm with EPDM holder 16.5 mm
•
profile: 6 x 14 mm
•
spacing 9 mm
Natural colour or painted in an environmentally friendly TGIC-free
polyester powder coating (colours, see Jaga color chart)
"Designo" rigid aluminium grilles:
Profiled slats placed lengthways (7 x 16 mm) with 7 mm space be-
tween, mechanically connected with two crossways supporting slats
(5 x 27 mm) with maximum 30.5 cm space between
•
free air flow 50 %
Versions: anodized aluminium in natural coloured / dark brown / black
/ brass coloured / lacquered in a scratch resistant epoxy-polyester
powder, sprayed electro-statically and baked at a temperature of 200
°C. UV-resistant due to ASTM G53.
Rigid aluminium grilles
Profiled slats placed lengthways (7 x 16 mm) with 13 mm space be-
tween, mechanically connected with two crossways supporting slats
(5 x 27 mm) with maximum 30.5 cm space between.
•
free air flow 75%.
Versions: anodized aluminium in natural coloured / dark brown / black
/ brass coloured / lacquered in a scratch resistant epoxy-polyester
powder, sprayed electro-statically and baked at a temperature of 200
°C. UV-resistant due to ASTM G53.
Roll-up aluminium grilles:
Crossways positioned aluminium slats (5 x 23 mm) with 10 mm space
between. The slats are interconnected by a galvanized steel spring
and fixed in the correct distance by aluminium pieces in the same col-
our.
•
free air flow 70%.
Versions: anodized aluminium in natural coloured / dark brown / black
/ brass coloured / lacquered in a scratch resistant epoxy-polyester
powder, sprayed electro-statically and baked at a temperature of 200
°C. UV-resistant due to ASTM G53.
Jaga reserves the right to change product specification at any time in line with our policy of continuous improvement and innovation.
Jaga N.V., Verbindingslaan 16, B-3590 Diepenbeek Tel.: +32 (0)11 29 41 11, Fax: +32 (0)11 32 35 78, info@jaga.be. - www.Jaga.com -
Product discriptions Jaga Mini Canal PRO
Roll-up stainless steel grilles
Roll-up grille in rust proof high-grade steel 1.4301.
Crossways positioned stainless steel slats (8 x 18 mm) with 12 mm
space between.
The wood slats are interconnected by a stainless steel spring and
fixed in the correct distance by stainless steel synthetic pieces.
•
Free air flow 60%
Including black rubber strip to hide the bottom side of the insert frame,
and to avoid contact noises.
"Designo" rollable wooden grilles:
Crossways positioned wooden slats (12 x 24.5 mm) with 13 mm space
between. The wood slats are interconnected by a galvanized steel
spring and fixed in the correct distance by natural coloured aluminium
pieces.
•
free air flow 52%.
Versions: oak / beech / merbau / oak varnished / beech varnished /
merbau varnished.
Rollable wooden grilles:
Crossways positioned wooden slats (12 x 24.5 mm) with 20 mm space
between. The wood slats are interconnected by a galvanized steel
spring and fixed in the correct distance by dark brown synthetic piec-
es.
•
free air flow 63%
Versions: oak / beech / merbau / oak varnished / beech varnished /
merbau varnished
Options:
•
base insulation: in dark grey polyethylene foam, thickness 5 mm
•
3-sided insulation: in dark grey polyethylene foam, thickness 5 mm
•
cover strip: to hide the bottom side of the insert frame and to avoid
contact noises
•
fixing with height control: to adjust the height on uneven and rough
cast sub- floors. Provided with acoustic decoupling..
•
corners: angle 90 ° / angle 135 °
•
Cover plate: 22 mm thick fibreboard plate. Protects the Mini-Canal
against contamination and damaging during construction works
How to install:
The building services engineer chooses the heating elements consid-
ering the following conditions:
•
a heat output calculation according to the standard
•
the required heat outputs will be determined by the tables and the
fitting instruction of the building services engineer
•
the heat exchanger should be connected to a two pipe system with
a same end connection / other end connection (just for type 04)
•
the heat exchanger is equipped with two brass collectors for left or
right 1/2" same end connection. Air vent 1/8" and drain cock 1/2"
are included. In case of same end connection the flow valve always
has to be fitted to the top connection.
•
in order to totally block off the cold draughts from the window it
is preferable that the heat exchanger covers the full length of the
window. Concerning the distance in between the window and the
Mini-Canal allow extra space for curtains, which under no circum-
stances should hang over the Mini-Canal. The heat exchanger must
always be kept accessible for maintenance purposes.
Manufacturer: Jaga n.v.
Model: Jaga Mini Canal PRO
19 October 2020 1:34 pm
E
Publicité
