X-Boost And Eps; X-Boost; Eps - EcoFlow DELTA Pro Manuel D'utilisation

Masquer les pouces Voir aussi pour DELTA Pro:

Table des Matières

Les langues disponibles

X-Boost and EPS

With EcoFlow X-Boost technology, the product can power a 4,500W max. device while the

rated output power remains 3,600W, avoiding operation failure due to ovverload protection.

X-Boost Tips:

1. X-Boost is not available when the AC output is turned on in a recharging state (in bypass

mode).

2. X-Boost is not applicable for all electrical appliances; it's incompatible with appliances

with strict voltage requirements and a rated power over 3600W. Appliances with voltage

protection (such as precise instruments) are not supported. X-Boost mode is more suitable

for heating devices. Please conduct your own tests with your devices with X-Boost enabled.

Bypass mode: When the product is plugged into the power socket for recharging and

connected to other devices at the same time, it cannot provide power to the devices if

the AC power button is turned on, instead, the devices are powered by the grid.

The product supports EPS. When you connect the grid power to the AC Input Port of the

product through an AC cable, you can power electrical devices through the AC Output Port

(AC power will come from the grid and not the power station in this situation). In case of a

sudden blackout, the product can automatically switch to the battery powered supply mode

within 30ms.

As a basic UPS function, this function does not support 0ms switching. Please do not

connect the product to any device that requires 0ms UPS, such as data servers and

workstations. Please test and confirm the compatibility before using the product. We

recommend that you only charge one device at a time and avoid using multiple ones

at the same time to avoid overload protection. EcoFlow takes no responsibilities for

any device failures or data losses caused by failures to follow instructions.

Table des Matières

Delta 2