Uline H-7699 Mode D'emploi page 4

11. Attach door to hinges with four M5 x 8 Phillips head
bolts and hex nuts, using an 8 mm wrench and
Phillips screwdriver. (See Figure 9)
Figure 9
12. Insert door handle into door loosely and thread two
M5 x 5 Phillips Panhead bolts into door handle from
inside of door. Do not tighten. (See Figure 10)
PAGE 4 OF 12
ASSEMBLY CONTINUED
13. On the inside of the door, place door lock through
the thread of the door handle and the hole on the
side of the door. Secure door handle using the two
M5 x 5 Phillips Panhead bolts and Phillips screwdriver.
(See Figures 11-12)
14. Secure door lock by placing lock washer and large
hex nut onto door handle thread and fasten using
17 mm wrench. (See Figure 13)
Figure 10
15. Insert drawer. (See Figure 14)
1-800-295-5510
uline.com
Figure 11
Figure 13
Figure 14
Figure 12
0821 IH-7699