Electrolux MLV34GGTWB Manuel D'utilisation page 4

Note: This is a guide of clothes that you can place on a maximum load of dry clothes to achieve excellent washing results.
4
1. Selection of Automatic Programs
Turn the knob to select the desired program. Depending
on the model of your machine, up to 14 programs may be
available.
2. Temperature Level
Each cycle has a recommended wash temperature. Turn the
knob if you prefer a different wash temperature (from cold
to hot).
3. Water Level/Load
In models equipped with 2 knobs only, the water level is set
using the knob marked as N
desired level. If your washer is equipped with an automatic
sensor, you can select it, so the machine will set the level for
you.
Note: Both, the automatic and manual levels are designed
to save water. It is normal that the load is not completely
immersed in water.
4. Spin Level
Turn the knob to select the level of drying that you want to
obtain a er the wash cycle, or use the automatic level so the
machine will select the recommended level, according to the
selected program.
5
2
2. Turn the knob to select the
o
6
1
5. Selection of stages (manual cycles)
Repeatedly press this pad to select a single stage or a
combination of washing stages you want to execute, for
example: spin only, or rinse and spin. Indicator lights will
come on showing the selected stages.
6. Start/Pause
Touch this pad when you want to start or pause the
operation of your washing machine.
7. Lid Lock
This LED indicator will light up when the lid is locked, thus
avoiding that the user reaches into when the machine is at
the washing process.
8. Self-cleaning (alarm)
This LED will light up when the machine needs cleaning.
When this occurs, select the self-cleaning program with
the knob, make sure that there are no clothes inside the
washer and press the START/PAUSE pad. Using this
program you can remove soil from hard to reach areas
avoiding this soil to get into the load.
7
8
3
2-4
3