Eu Declaration Of Conformity - ITRON MZ Mode D'emploi

Declares on his sole responsibility that the product Quantometer MZ/MTZ is designed and
manufactured in conformity with the following directives:
1. 2014/68/EU (PED) Modules B+D Category IV
- DIN EN 12261:2017
EU Certificate DVGW CE-0085BS5061
The module D is supervised by:
TÜV SÜD Industrie Service GmbH (CE 0036) Westendstr. 199, D-80686 München
The used fluids are classified in group 1 according article 13.
Certificate: DGR-0036-QS-955-20
2. 2014/30/EU (EMC)
- EN 60947-5-2:2018
- EN 61000-6-2:2019
- EN 61000-6-3:2007/A1:2011/AC:2012;
3. 2014/34/EU (ATEX)
- EN 60079-0:2019
- EN 60079-11:2012
- EN ISO 80079-36:2016
- EN ISO 80079-37:2016
Certificate: LCIE 06 ATEX 6031 X
II 1/2 G Ex ia IIC T5 Ga / Gb h T6
#0081 LCIE 33 avenue General Leclerc, F-92266 Fontenay-aux-Roses
The module D is supervised by:
#0123 TÜV SÜD Product Service GmbH Ridlerstr. 65, D-80339 München
Certificate: EX2A 17 05 70229 004
4. 2011/65/EU (RoHS)
- EN IEC 63000
D2035933_AF_EU_Declaration_MZ.docx

EU Declaration of Conformity

Itron GmbH
Hardeckstraße 2
D-76185 Karlsruhe
Karlsruhe, March 10th, 2020
M. Einhaus
Director Product Development
1 / 6