ATH-Heinl Frame Lift 30FZ Manuel D'utilisation page 58

2.4 Location
The machine should be kept away from flammable and explosive materials, as well as from sunlight and
intense light. The machine should be placed in a well-ventilated location.
The machine must be set up on sufficiently firm ground, if necessary, according to the minimum
requirements of the information given in the foundation plan.
In addition to the ground conditions, the guidelines and instructions of the accident prevention regulations
as well as the workplace regulations must be observed when selecting an installation site.
When assembling on floor coverings, check their load-bearing capacity. A construction expert should be
consulted for inspection when mounting on floor coverings.
The machine should only be mounted and used within closed rooms. It has no corresponding safety
features (e.g. IP protection, galvanised design, etc.).
Temperature
Sea level
Humidity
Drawing
B1
L1
H
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-09
1,000 mm
Approx. 2,800 mm
Approx. 4,000 mm
Manufacturer ATH-Heinl GmbH & CO.KG
- 13 -
4-40 °C
< 1500 m
50% at 40 °C – 90% at 20 °C
B2
L2
1,000 mm
Approx. 2,800 mm