Publicité
Bounce
HID/PicoEmitter
®
10.
Slide Optical Array onto the locating
pins and secure with screws removed
in step 7 above. You may need to lift
hood slightly.
0-10V Dimming
Standard Input Black (+)
Green (GND)
Gray Dimming Lead (-)
Purple Dimming Lead (+)
Fixture
Housing
1 mA Max
• Dimming range from 100% to 10%
through the use of the standard 0-10V
interface on the programmable driver.
• Modular wiring harness in the service area
provides user access to the dimming cir-
cuitry.
• Dimming circuitry compatible with 0-10V,
user-defined control devices.
• Optional factory programmed dimming
profile
• 17760 Rowland Street • City of Industry, CA 91748 • 626-968-5666
© 2021 KIM LIGHTING
TIR Upgrade Kit Installation Instructions
™
11. Hold the fixture hood up with your left
hand, push the stop arm straight back
to release.
White (-)
12.
Pull the fixture hood down until it latches
to the lens frame (you'll hear a"click").
Push up on the fixture hood to ensure
the hood is secured.
Page 3
Publicité
