Battery.details - WowWee ROBOSCOOPER Manuel D'utilisation

battery details
battery details
Roboscooper.requires.6.x."AA".size.alkaline.batteries.(not.included)..The.remote.controller.requires.3.x."AAA".
size.batteries.(not.included).
Installing or changing batteries in Roboscooper
You.will.know.when.Roboscooper's.batteries.are.nearly.depleted,.because.he.will.become.less.responsive.to.
commands.from.the.remote.controller,.and.his.movements.will.be.slower..
To.install.or.change.the.batteries.in.Roboscooper:
1.. Open.the.battery.
compartment.on.the.remote.
controller.using.a.Phillips.
screwdriver.(not.included).
to.remove.the.screws.on.the.
battery.compartment.cover.
2.. Insert.the.batteries.according.
to.the.diagram..Ensure.that.the.
positive.and.negative.polarities.
match.the.illustrations.inside.
the.battery.compartment.
3.. Replace.the.battery.
compartment.cover.and.
replace.the.screws.using..
the.screwdriver..Do.not..
over-tighten.
Installing or changing batteries in the remote controller
To.install.or.change.the.batteries.in.the.remote.controller:
1.. Open.the.battery.compartment.on.
the.remote.controller.using.a.Phillips.
screwdriver.(not.included).to.remove.
the.screw.on.the.battery.compartment.
cover.
2.. Insert.the.batteries.according.to.the.
diagram..Ensure.that.the.positive.
and.negative.polarities.match.the.
illustrations.inside.the.battery.
compartment.
3.. Replace.the.battery.compartment.
cover.and.replace.the.screw.using.the.
screwdriver..Do.not.over-tighten.
4
6 x 1.5V
LR6-UM3
3 x 1.5V
LR03-UM4