Publicité
Les langues disponibles
Les langues disponibles
recommended that two or more
people carry out the door removal and
refitting.
• Place the door on a non-scratching
surface with the inner side facing up.
NOTE
• The number of wire harnesses may
vary depending on the model.
Refitting the Fridge and
Freezer Door
Refit the doors in the reverse sequence
of their removal once the appliance has
been passed through all access doors.
CAUTION
• Install the fridge door first.
Levelling and Door
Alignment
Levelling the Appliance
The appliance has two front levelling
legs. Adjust the legs to alter the tilt from
front to back or side to side. If the
appliance seems unsteady, or the doors
do not close easily, adjust the
appliance's tilt using the instructions
below.
INSTALLATION
Use the spanner
a
by turning the levelling leg to the left to
raise it or to the right to lower it.
NOTE
• Leveling the doors may not be possible
when the floor is not leveled, or is of
weak or poor construction.
• The refrigerator is heavy and should
be installed on a rigid and solid
surface.
• Some timber flooring may cause
levelling difficulties if it flexes
excessively.
• The rollers, which are not castors,
should be only used for forward or
backward movement. Moving the
refrigerator side ways may damage
your floor and the rollers.
13
to adjust the height
Publicité
