Samsung DVD-VR370 Mode D'emploi page 63

5. Press the OK button.
If the timer settings overlap
The fi rst programme has priority.
After recording of the fi rst programme is complete, the second programme starts being recorded.
6. Turn the power off to fi nish the Timer Recording setting.
•
will blink if disc or tape is not inserted.
•
will appear on the front panel. It means that a timer recording is registered.
Timer Recording will not work when the power is on.
M

The timer recording time may differ from the set time depending on disc status and overall timer recording status
(for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start
time of the next recording.)
EDITING THE TIMER LIST
Follow these directions to edit the timer record list.
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Timer, then press the OK button.
2.
Press the ▲▼ buttons to select the Timer List, then press the
3.
OK button.
Press the ▲▼ buttons to select the number of the Timer List
4.
you want to edit, then press the OK button.
•
The Edit and Delete items are displayed.
Press the ▲▼ buttons to select Edit, then press the OK button.
5.
•
The Timer List screen is displayed. Edit the items you want to
modify.
See the Timer List section for more information on Timer List
Input items. (See pages 61~63)
6. Press the OK button to confi rm the edited setting.
7. Press the EXIT button after fi nishing the operation.
The menu screen will disappear.
XCV KL
DVD-VR375 only
Timer
Title List
Timer - Standard
Timer - ShowView
Timer
Timer List
Edit
Dubbing
Disc
Setting
Setup
> Move sOk rReturn
Timer List
No. Media Date Start End Prog. Mode
01 DVD 01/01 12:00 12:00 Prog. 1 SP
Edit
Delete
02 --- --/-- --:-- --:-- ---- ---
03 --- --/-- --:-- --:-- ---- ---
04 --- --/-- --:-- --:-- ---- ---
05 --- --/-- --:-- --:-- ---- ---
06 --- --/-- --:-- --:-- ---- ---
m Move sOk rReturn
English _63
12:00
eExit
12:00
PDC
Edit
/VPS
►
--
►
--
►
--
►
--
►
--
►
--
eExit