Publicité
Les langues disponibles
Les langues disponibles
connecting & setting up
CONNECTING DVD RECORDER & VCR TO THE TV USING THE RF
CABLE
M
Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.
1.
Remove the aerial or network input cable from the television.
2.
Connect this cable to the 75 aerial jack marked
3.
Plug the RF Cable supplied into the
4.
Plug the other end of the RF Cable into the connector previously used for the aerial on the television.
M
The RF cable connection of this product sends only signal of TV.
You must connect Scart cable or Audio/Video cables to watch a DVD and Video tape from your DVD Recorder & VCR.
20_ connecting & setting up
on the rear of your DVD Recorder & VCR.
jack on your DVD Recorder & VCR.
To RF IN
To RF OUT
To ANT INPUT
Publicité
