Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL MENU
-Push on button P3 to have access to the menu
-Use buttons P5 and P6 to run on the different menu
-Push again on button P3 to enter into the displayed menu
-Use buttons P5 and P6 to run on the different submenu, the buttons P1 and P2 modify
the value shown on the display
-The button P3 accedes to the displayed menu/submenu
-The button P4 returns always to the previous menu
MENU DESCRIPTION
Menu 02 SET WATCH (Setting the clock inside the equipment).
•
Menu 03 SET CHRONO (Set the schedules for automatic on / off).
•
Menu 04 CHOSE LANGUAGE (Set the language on the control panel).
•
Menu 05 STAND-BY (On/Off Stand-By)
•
Menu 06 SOUND (Setting the beep sound).
•
Menu 07 FIRST LOADING (Pellet loading in continuously).
•
Menu 08 STOVE STATUS (Displays the status of the appliance).
•
Menu 09 CORRECT PELLETS (Correction of carburetion of the appliance).
•
Menu 10 TECHNICAL CALIBRATIONS (Only for TECHNICAL STAFF).
•
MENU 02 (set clock)
With this Menu you can adjust the time and the date of the electronic card, the set date and
time will be utilized as reference for the activation of the switch ON/OFF programs
Pay ATTENTION to the regulation of the Time and Date, these regulations will influence the
on/off programs for the automatic lighting and turning off.
MENU 03 (set chrono)
Within this Menu you can set up the automatic cycles of switching ON/OFF you desire to
utilize. There are 3 different modalities you can use even contemporaneously, but pay
attention to not overlap the programs.
PROGRAM DAY. The programs inserted in this section will be repeated every day of the
week in the same way (max 2 ON/OFF cycles)
PROGRAM WEEK. With the programs inserted in this section you can effect different
ON/OFF during the days of the week (max 4 ON/OFF cycles
PROGRAM WEEK-END. The programs inserted in this section will be repeated exclusively
on Saturday and Sunday (max 2 ON/OFF cycles).
MENU 04 (language)
Within this Menu you can change the language utilized by the control panel. There are 4
possibilities: Italian – English – German - French
MENU 05 ( stand-by)
The appliance is preset to work in 2 (two) different modalities
IT IT IT IT- - - - GB
GB- - - - FR
FR- - - - ES
ES mod. 502-502X-502L-502LX
GB
GB
FR
FR
ES
ES
52/128
Publicité
