vitapur VWD5446BLS Guide D'utilisation Et D'entretien page 7

Pre-Operation (continued)
INSTALLING THE WATER BOTTLE
3
Control Panel LED Light Functions
RED LED LIGHT
1
(HOT WATER)
YELLOW LED LIGHT
2 (EMPTY WATER
BOTTLE)
BLUE LED LIGHT
3
(COLD WATER)
4
1
Solid Red "On" = optimum hot water temperature is ready for
dispensing.
"Off" = ensure the hot water switch is activated. This indicator
light will remain "flashing" while the heating cycle is operating.
"Flashing" = low water level / empty bottle; replace water bottle.
"Off" = adequate water level for dispensing.
Solid Blue "On" = optimum cold water temperature is ready for
dispensing.
"Off" = This indicator light will remain "off" while the cooling cycle
is operating.
1
5
2 3
2