Nexgrill 720-0783E Mode D'emploi page 16

(f). Push control knob onto valve control stem.
(g). Plug ignition wire into igniter electrode
hanging from the underside of burner.
Fig.12
12.Side Shelf Assembly
(a). Loosen but do not remove two screws which
are pre-assembly on the left side panel, through
side shelf keyholes hang side shelf on two
loosened screws.
(b). Using (3) ¼" truss head screws (AA), (3) ¼"
flat washer (FF), attach side shelf to firebox from
inside the firebox. Insert (2) 5/32" truss head
screws (CC),(2) 5/32" flat washers (EE) to attach
the side shelf control panel to the main control
panel. Fully tighten the two loosened screws to
secure shelf to firebox.
16