Atlas Copco TEX 3 Prescriptions De Sécurité Et Instructions Pour L'opérateur page 14

Safety and operating instructions
TEX 10PS
TEX 12PS
Handle
A.
B. Trigger
Tool retainer
C.
Air inlet
D.
E. Cylinder
Silencer
F.
14
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels shall be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
Data plate
A. Machine type
Maximum permitted compressed air pressure
B.
C. Serial number
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
The CE symbol means that the machine is
E.
EC-approved. See the EC declaration which
is delivered with the machine for more
information. If the CE symbol is missing, it
means that the machine is not EC-approved.
Noise level label
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0799 90 | 2010-01-01
TEX 3, 05P, 09PS, 10PS, 12PS
Original instructions