Introduction; Manual Purpose And Contents; Target; How To Keep This Manual - Nilfisk Advance Terra 3700B Mode D'emploi Et D'entretien

INSTRUCTIONS FOR USE

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

The purpose of this manual is to provide the customer with
all necessary information to use the machine properly in a
safe and autonomous way.
It contains information about technical characteristics,
operation, machine inactivity, maintenance, spare parts
and safety conditions.
Before carrying out any procedure on the machine, the
operators and qualified technicians must read this manual
carefully. Contact the manufacturer in case of doubts
regarding the interpretation of the instructions and for any
further information.

TARGET

This manual is intended as a guide for the operator and
the technicians qualified to perform the machine
maintenance.
The Operators must not carry out operations reserved for
qualified Technicians. The manufacturer will not be
answerable for damages coming from the
non-observance of this prohibition.

HOW TO KEEP THIS MANUAL

The Instructions for Use must be kept near the machine,
inside an adequate case, away from liquids and other
substances that can cause damage to it.

IDENTIFICATION DATA

The machine model and serial number can be found on a
plate (1, Fig. U) affixed to the machine frame and readable
from inside, by simply raising the machine hood (10, Fig.
C).
The machine production year is shown after the date Code
on the serial plate (A04 means January 2004).
This information is useful when requiring machine
replacement parts. Use the following table to write down
the machine identification data for any further reference.
MACHINE model .........................................................
MACHINE serial number .............................................
2

OTHER REFERENCE MANUALS

– Electronic Battery Charger Operating Manual, which
is to be considered an integral part of this manual.
– Moreover, the following manuals are available:
• Spare Parts List (supplied with the machine).
• Service Manual (at Advance Service Centers).

SPARE PARTS AND MAINTENANCE

All necessary operating, maintenance and repair
procedures must be carried out by qualified personnel or
by Advance Service Centers. Only original spare parts
and accessories must be used.
Call Advance for service or to order spare parts and
accessories, specifying the machine model and serial
number.

MODIFICATIONS AND IMPROVEMENTS

Our company constantly improves its products and
reserves the right to make changes and improvements at
its discretion without being obliged to apply such benefits
to the machines that were previously sold.
Any change and/or addition of accessory must be
approved and performed by the manufacturer.

SAFETY

The following symbols indicate potentially dangerous
situations. Always read this information carefully and take
the necessary precautions to protect people and objects.
The machine operator's cooperation is essential in order
to prevent injury. No accident prevention program is
effective without the total cooperation of the person
responsible for the machine operation. Most of the
accidents that may occur in a factory, while working or
moving around, are caused by failure to comply with the
simplest rules for exercising prudence. A careful and
prudent operator is the best guarantee against accidents
and is essential for successful completion of any
prevention program.
Terra™ 3700B – 146 1963 000(2)2006-06