Quax COCOON 54F01-0400 Serie Manuel page 40

Step 4.11 : Use the doors 10, 11 and 12, seven hinges P and fourteen wood screws A
Place the hinges (P) on the drillings in the doors (10, 11 and 12) and secure each hinge with two wood screws (A).
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
COCOON 54F01-0400x
T 0032 9 380 80 95
40
Step 4.10 : Use the parts from step 4.9,
the drawer back 16, four wood screws
C, the drawer bottom 17, three wood
screws I, the rest of the slider parts L and
six wood screws B.
Place the drawer back (16) between the
drawer sides. Push the wood screws
(C) in the holes at the rear outside of
the drawer sides and tighten them in the
back. Push the drawer front with its con-
nectors into the drillings of the drawer
sides. Tighten the minifi x. Slide the bot-
tom (17) into the slot of the drawer front
and secure in the back using the wood
screws (I). Place the inner slider parts
on the holes of the drawer sides. Attach
each slider with three wood screws (B).
www.quax.eu - E E info@quax.eu