Quax COCOON 54F01-0400 Serie Manuel page 35

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Assembling the wardrobe
Step 4.2 : Use the intermediate side 3, four wooden dowels E,
the other slider L, nine wood screws A, two push systems H,
four wood screws I, two rod holders S and four shelf supports T
Push two wooden dowels (E) into the drillings at the top and
bottom of the intermediate side (3). Disassemble the slider (L).
Place the outer slider on the holes on the left side of the in-
termediate side. Attach the slider with fi ve wood screws (A).
Note the detail. Disassemble the push systems (H) Place the
mounting plate with the lip
the drillings above and under the slider. Attach the mounting
plates with two wood screws (I). Push the systems back onto
its holder. Push four shelf holders (T) into the drillings at the
bottom and top left side of the intermediate side. Place the rod
holders (S) on the drillings in the middle of the right side of the
intermediate panel. Attach the holder with two wood screws
(A).
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
COCOON 54F01-0400x
(see red
arrow) facing backward, on
T
0032 9 380 80 95
Step 4.1 : Use the left side 1, the right side 2, eight
wooden dowels E, eight connectors F, one slider L, se-
ven hinge mounting plates R, two rod holders S, nine
wood screws A and four shelf supports T
Tighten six connectors (F) in the drillings of the left side
(1). Tighten two connectors (F) in the holes at the top
of the right side (2). Push two wooden dowels (E) into
the holes at the top and bottom of the sides (1 and
2). Disassemble the slider (L). Place the outer slider
on the drillings of the left side. Attach the slider with
fi ve wood screws (A). Note the detail. Push four hinge
mounting plates (R) into the holes at the front of the left
side. Push three hinge plates (R) into the drillings at the
front of the right side. Place the rod holders (S) on the
provided drillings in the middle of the right side. Attach
the support with two wood screws (A). Push two shelf
supports (T) into the provided holes at the bottom and
top of the left side.
35
www.quax.eu - E
E
info@quax.eu

Publicité

Table des Matières
loading

Table des Matières