Useful Information; Periodical Cleaning And Maintenance - HIGHONE DC 7 B W566C2 Consignes D'utilisation

B C

Useful information

Using the appliance
Drying function
Specific drying functions
1. Drying procedure (delayed).
To delay the start of the programme by 3, 6, 9 or 12 hours.
When the delayed programme starts, the time starts to decrease and the indicator lights
up.
Detailed procedure:
1. Load your laundry and make sure the machine door is closed.
2. Press ON/OFF, then turn the programme selector to select the desired programme.
3. If needed, you can select the [Anti-crease] function.
4. Press the [Delayed start] button.
5. Hold the [Delayed start] button to select the desired time.
6. After pressing the [Start/Pause] button, the dryer switches to the operating mode. The
drying cycle will start once the selected time has elapsed.
7. If you press the [Start/Pause] button again, the delayed start function will pause. (8). To
cancel the delayed start function, press the [On/Off ] button.
2. [Anti-crease] function
At the end of the drying cycle, the duration of the anti-crease operation is either 30 minutes
(default) or 120 minutes (selected by you).
The [Anti-crease] indicator will light up if you have selected the Anti-crease function. This
function prevents your laundry from creasing. You can remove the laundry during the anti-
crease phase. Except for the [Cold], [Refresh], [Hot 30'] and [Hot 60'] programmes, this
function can be used for all programmes.
3. Instructions for the [Childproof ] function
1. This appliance is equipped with a special child lock to prevent children from inadvertently
pressing the machine's buttons or mishandling the machine.
2. While the dryer is running, press the [Anti-crease] and [Delay start] buttons
simultaneously for three seconds to activate the Childproof function. When the Childproof
function is activated, the indicator is lit and no buttons on the dryer work except for
the [On/Off ] button. During the start phase of the childproof function, the [Anti-crease]
and [Delayed start] buttons can be pressed simultaneously for more than 3 seconds to
deactivate the childproof function.
12 12 EN EN
C
Useful information

Periodical cleaning and maintenance

Emptying the water tank
1. Hold the water tank with both hands and pull toward
yourself;
2. Tilt the water tank and pour the condensed water into
a sink;
3.Replace the water tank.
CAUTION
1. Empty the water tank after each use. The programme
will pause and the "Full" indicator will light up if the water
tank is full during the drying process. Once the tank is
empty, the dryer can be restarted by pressing the [Start/
Pause] button.
2. Do not drink the condensed water.
3. Do not use the dryer without the water tank.
Cleaning the lint hatch
1.Open the hatch.
2.Remove the filter from the hatch.
3. Clean the filter hatch. Remove any lint trapped on the filter hatch.
4.Replace the filter hatch.
13
Filter hatch
EN