Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
C
Useful information
6.Clean the seals.
7.Reinsert the condenser using the button.
8.Unscrew both blocking levers.
9.Close the maintenance hatch until it clicks into place. Clean the condenser about every 3
months if used frequently.
Take care not to damage the condenser!
CAUTION
1. Clean with water only, do not use any objects with sharp
edges. Never use the machine without the condenser!
2. During the drying cycle, water may collect between
the glass and the seal, this does not affect the operation
of your dryer!
16
EN
C
Useful information
Malfunction display and solutions
Display
The tank is full
The "Full water tank" LED is
Problem with the water pump
permanently lit
or water level sensor
Temperature sensor
Childproof +9 hours
malfunction
Childproof +6 hours
Moisture sensor malfunction
Childproof +3 hours
Water heater malfunction
17
Reason
Solutions
Empty the tank
Please contact your local
customer service if the
problem persists
EN
Publicité
Table des Matières
