Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
A
Preview of the appliance
Description of the appliance
1
Tank
2
Power Cord
3
Drum
4
Lint filter
5
Control panel
Accessories
The following parts are optional depending on the model.
If your dryer has the following parts, you can install them according to the instructions below
to transform your condenser dryer into a vented dryer:
Hose support (optional)
Condensate drain pipe (optional)
Installation:
Step 1: Remove the drain hose from the hose connector with pliers
Step 2: Insert the external drainage pipe
6
Door
7
Air supply
8
Handle
9
Maintenance grille
4
EN
A
Preview of the appliance
Quick operation
1. Check that the tank and filters have
been cleaned.
2. Open the door and
load the laundry.
3. Close the door to
the machine.
4. Connect the power cable and
turn on your machine by pressing
the [On/Off ] button.
5.Select the desired programme.
6. Start your program by
pressing the [Start/Pause]
button.
Control panel
1
Programme selection button
LED indicator (Delayed start, 3h, 6h,
2
9h, 12h, Child Lock, Filter, Full water
tank and Anti-crease
Special function selector buttons
3
(Delayed start, Anti-crease, Child
Lock)
9. Clean the filters and empty
the tank.
8. Turn off your machine by
pressing the [On/Off ] button.
7. Remove the laundry once
the programme is finished.
4
ON/OFF button
5
Start/Pause button
6
Operation light indicator
5
EN
Publicité
Table des Matières
