1. Manuels
  2. Marques
  3. Lifetime Manuels
  4. Maisons de jardin
  5. 60354
  6. Instructions d'assemblage

Lifetime 60354 Instructions D'assemblage

Abri extérieur
Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
OUTDOOR
SHED
MODEL 60354
BEFORE ASSEMBLY:
• Assemble on a level platform
• At least 3 people recommended for setup
• Inspect all parts and hardware. Ensure all are
included using the Parts Identifier in the middle
of these instructions. The Parts Identifier , in
yellow, can be removed from the instructions for
quick reference
WATCH
3D ANIMATION
OF THE FULL ASSEMBLY
SCAN THE
CODE
FOR DOMESTIC USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
TOOLS REQUIRED (NOT INCLUDED)
QUESTIONS?
Dial: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
OR SEARCH
1218247
CONTACT LIFETIME CUSTOMER SERVICE:
Live Chat: www.lifetime.com/customerservice
(click on "LIVE CHAT" tab)
For Customer Service in the United Kingdom and mainland Europe:
E-mail: cs@lifetimeproducts.eu
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
5/16" (≈8 mm) Wood Drill Bit
5/16" (≈8 mm) Masonry Drill Bit
MODEL# AND PRODUCT ID
Model Number: 60354
Product ID:
TABLE OF CONTENTS
Icon Legend...................................................4
Warnings & Notices.......................................5
Platform Construction...................................6
Truss Assembly............................................11
Gable Assembly...........................................16
Door Assembly.............................................21
Floor Assembly.............................................30
Wall Assembly.............................................33
Parts Identifi er.............................................37
Shelving Installation...................................43
Door & Gable Installation............................46
Roof Assembly.............................................50
Wall Hook Installation.................................60
Window Installation....................................62
Door Alignment...........................................65
Shed Anchoring...........................................67
Cleaning & Care..........................................71
Registration..............................................72
Warranty....................................................73
(both are needed when contacting us)

Publicité

Table des Matières
loading

Manuels Connexes pour Lifetime 60354

Sommaire des Matières pour Lifetime 60354

  • Page 1: Table Des Matières

    Shed Anchoring...........67 Cleaning & Care..........71 5/16" (≈8 mm) Masonry Drill Bit Registration..........72 Warranty............73 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Live Chat: www.lifetime.com/customerservice MODEL# AND PRODUCT ID Dial: 1-800-225-3865 (both are needed when contacting us) (click on “LIVE CHAT” tab) Model Number: 60354 For Customer Service in the United Kingdom and mainland Europe: 7:00 am–5:00 pm (Monday–Friday) MST...

  • Page 2: Instructions D'assemblage

    5/16 po (≈8 mm) Mèche à maçonnerie Garantie...............74 ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME Chat en direct: www.lifetime.com/customerservice N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT Composer au 1-800-225-3865 (cliquer sur la languette « LIVE CHAT ») (il faut avoir les deux au moment de nous contacter) Pour les services à...

  • Page 3: Instrucciones De Ensamblaje

    5/16 in (≈8 mm) Broca de albañilería Registro................72 Garantía.................75 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: www.lifetime.com/customerservice Marcar al 1-800-225-3865 MODEL E ID DEL PRODUCTO (cliquear en la lengüeta «LIVE CHAT») (se necesitan los dos al contactarnos) Número de modelo: 60354...
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / SIGNIFICADO DE LOS ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. •...

  • Page 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...

  • Page 6: Platform Construction

    PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS CONCRETO REQUERIDO 1 yd (0,77 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 95 3/8"...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS MADERA REQUERIDA RIDA WOOD PLATFORM / PLATE-FORME EN BOIS PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 95 3/8" x 89 1/2" (2,42 m x 2,27 m).
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 2 in/po x 4 in/po x 88 3/16 in/po (5,1 cm x 10,2 cm x 2,24 m) (x2) 2 in/po x 4 in/po x 90 3/4 in/po (5,1 cm x 10,2 cm x 2,31 m) (x7) 16d 3 in/po (16d x 7,62 cm) (x28) 1.2.1...
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 40 3/16 in/po x 93 3/4 in/po x 3/4 in/po 48 in/po x 93 3/4 in/po x 3/4 in/po (1,02 m x 2,38 m x 19,1 mm) (x1) (1,22 m x 2,38 m x 19,1 mm) (x1) 8d 1 1/2 in/po (8d 3,81 cm) (x48)

  • Page 11: Truss Assembly

    TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLAJE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje DTK (x8) ADY (x8) ADJ (x4) ADK (x16) 11 9/16 in/po (≈29,4 cm) ADH (x2) AIP (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 12 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADK (x8) DTK (x8) • Slide a Connector (AIP) onto the ends of two Truss Gutter Channels (DSR) as shown. •...
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADY (x8) ADK (x8) • Attatch the Large Truss Brace using the hardware included. Do not overtighten the Cap Nuts. •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 11 9/16 in/po (≈29,4 cm) ADH (x2) • Slide a Truss Rod (ADH) through the holes in the Large Truss Brace and Connector. •...
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (≈11 mm) (x2) ADJ (x4) • Secure it with two Cap Nuts (ADJ). Do not overtighten the Nuts. Repeat this section. •...

  • Page 16: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADV (x12) ADW (x10) ADZ (x6) AHS (x4) CXK (x2) ADK (x2) EYR (x2) EYQ (x2) AEE (x14)
  • Page 17 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) ADW (x5) AEE (x5) • Secure the two gable halves with four (4) Screws • Align the holes in the left (AGH) and right (AGI) rear (ADZ).
  • Page 18 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) AHS (x2) • Align the holes in the tube with those in the gable. • Insert an end cap (AHS) into each end of the square •...
  • Page 19 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ADW (x5) ADZ (x2) AEE (x7) AHS (x2) CXK (x2) EYQ (x2) • Secure with the hardware included. •...
  • Page 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADK (x2) ADV (x6) EYR (x2) AEE (x2) 3.12 • Align the holes in the header with those in the gable. •...

  • Page 21: Door Assembly

    LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLAJE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bags / Sacs de quincaillerie Bolsas de herraje AEE (x3) ADW (x3) ADJ (x2) ABU (x2) AHZ (x1) AHM (x2) FUH (x1)
  • Page 22 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a hinge tube (CRD) down into the hole at the top of the left door (BDJ). •...
  • Page 23 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHM (x2) AIB (x1) • Set the deadbolts (AHM) down into the recesses at the top and bottom of the door. Then, slide the door channel (AFC) over the edge of the door and the bottom of the deadbolts as shown.
  • Page 24 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) ADW (x3) ADJ (x2) ABU (x2) AHZ (x1) AEE (x3) FUH (x1) • Attach the door latch (FUH) to the door using the hardware included. Do not overtighten. •...
  • Page 25 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLAJE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADB (x2) AEE (x5) AAB (x2) AEB (x2) AHY (x1) ADW (x4) ABV (x2)
  • Page 26 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Slide a hinge tube (CRD) down into the hole at the top of the right door (BDK). •...
  • Page 27 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIK (x1) AEE (x3) AIO (x1) ADW (x3) • Slide the thumb lever (AIO) down into the grooves in •...
  • Page 28 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16" (≈11 mm) ABV (x2) FUL (x1) AAB (x2) FUM (x1) ADB (x2) AEB (x2) AHV (x1) •...
  • Page 29 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHY (x1) AHW (x1) ADW (x1) • Attach the bracket (AHW) using a screw (ADW), and attach the spring (AHY).

  • Page 30: Floor Assembly

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLAJE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie / Bolsa de herraje ADC (x1) AHO (x2) BQC (x20) Note: These are not anchoring screws. Their purpose is to fasten together the Floor Panels. Remarque : Ces vis ne sont pas les vis d’ancrage.
  • Page 31 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an inner fl oor panel (CUD) at an angle and slide the tabs along the edge underneath an outer fl oor panel (CUW). The tabs interlock.
  • Page 32 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x12) AHO (x2) Note: These are not anchoring screws. Their purpose is to fasten together the Floor Panels. Remarque : Ces vis ne sont pas les vis d’ancrage.

  • Page 33: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLAJE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x91) ADV (x4) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal / Piezas de metal...
  • Page 34 • Si tiene problemas con esta sección, escanee el código abajo para ver un video del ensamble del tobogán y los columpios http://go.Lifetime.com/outdoorstorageshed-section7 • Secure a Wall Support Channel (AFM) to the fi ve (5) Wall Panels (AHD) just to the left of the notch at the top of the Wall Panels using four (4) Screws (ADZ) for each.
  • Page 35 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x4) • Secure the Channel to the Panel using four (4) Screws (ADV). Note the angle of the Screws. •...
  • Page 36 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x8) • Secure a Wall Support Channel (AFM) to the Corner • Secure a Wall Support Channel (AFM) to the Corner Wall Panel (AGN) using four (4) Screws (ADZ).

  • Page 37: Parts Identifi Er

    PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 CONTENIDO DE LA CAJA 1 BDJ (x1) BDK (x1) EVZ (x1) EWA (x1) AGQ (x6) AGH (x1) AGI (x1) CUW (x2) AFV (x1) CUD (x1)
  • Page 38 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS METAL KIT / CONTENU DU KIT DE PIÈCES EN MÉTAL CONTENIDO DEL KIT DE PIEZAS DE METAL 50 9/16 in/po (≈1,28 m) DSR (x4) 59 1/2 in/po (≈1,51 m) 59 1/2 in/po (1,51 m) EYS (x1) 48 in/po (≈1,22 m)
  • Page 39 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 CONTENIDO DE LA CAJA 2 AGY (x1) AGW (x1) AGL (x1) AGN (x1) AHD (x5) AHH (x1) AFY (x2) CONTENTS OF SMALL PARTS KIT / CONTENU DU KIT PETITES PIÈCES CONTENIDO DEL KIT DE PIEZAS PEQUEÑAS AFL (x6)
  • Page 40 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS HARDWARE BAGS / SACS DE QUINCAILLERIE BOLSAS DE HERRAJE...
  • Page 41 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x15) • Insert the tabs of two Wall Panels (AHD or AHH) and • Bend the Corner Panel and snap the tabs in place. To slide the Panels to the front.
  • Page 42 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x30) 7.12 7.13 • Insert this Corner Panel (AGL) like the fi rst Corner Wall •...

  • Page 43: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x14) AIY (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 44 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIY (x2) • Insert the shelf brackets (AIY) into the slots in the wall support channels. The brackets must be at the same height and on the rear Wall.
  • Page 45 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Fold the fl aps on the ends of the shelf (AFV) up, and set the shelf onto the brackets.

  • Page 46: Door & Gable Installation

    DOOR & ENTRY GABLE INSTALLATION / INSTALLATION DU PIGNON D’ENTRÉE ET DES PORTES / INSTALACIÓN DE LA FACHADA DE ENTRADA Y LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADX (x4) AHP (x2) AIC (x1)
  • Page 47 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) • Pull the Hinge Tube down out of the Door about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 48 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Slide the holes in the Entry Gable down over the two Hinge Tubes. • Faire glisser les trous dans le pignon d’entrée vers le bas sur les deux tubes d’articulation. •...
  • Page 49 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) AIC (x1) AIM (x1) • Attach the Left (AIC) and Right (AIM) Gap Flaps to the corners of the Doors using the hardware included. These Flaps simply serve to block out light.

  • Page 50: Roof Assembly

    ROOF ASSEMBLY / MONTAGE DU TOIT / ENSAMBLAJE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADX (x18) ADZ (x100) AED (x18) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Page 51 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 10.1 • Set a truss assembly into the notches on the fi rst two opposite wall panels. Set a roof panel (AGQ) onto the gable, wall panel, and truss assembly.
  • Page 52 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 10.3 • Align the four holes in the wall panel with those at the bottom of the roof panel, and insert four (4) screws (ADZ) to secure the panel in place.
  • Page 53 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 10.4 • Insert the fi rst two screws (ADZ) through the gable and into the roof panel at the locations shown. Insert the roof support (AFL) into the notches in the gable and between the truss and the roof panel.
  • Page 54 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x16) 10.5 • Insert fi ve (5) more screws (ADZ) to secure the panel in place. •...
  • Page 55 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x20) 10.7 • Repeat the previous steps for the center roof panels but using ten (10) screws (ADZ) per panel. •...
  • Page 56 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x14) 10.8 • Attach the rear gable to the shed using fourteen (14) screws (ADZ). • Fixer le pignon arrière à l’abri à l’aide de quatorze (14) vis (ADZ). •...
  • Page 57 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x22) 10.9 • Attach the last two roof panels to the shed in the same way you did the fi rst two. •...
  • Page 58 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x22) 10.10 • Starting at the front, attach the ridge caps to the shed using the hardware included. •...
  • Page 59 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x18) AED (x18) 10.11 • Fold a skylight (AHC) and attach it to the roof using six (6) screws (ADX) and washers (AED) for each skylight. •...

  • Page 60: Wall Hook Installation

    WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS MURAUX / INSTALACIÓN DE LOS GANCHOS MURALES ACCESSORIES REQUIRED / ACCESSOIRES REQUIS / ACCESORIOS REQUERIDOS Accessory Bag / Sac d’accessoires Bolsa de accesorios EDL (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 61 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND ACCESSORIES REQUIRED / OUTILS ET ACCESSOIRES REQUIS INSTRUMENTAL Y ACCESORIOS REQUERIDOS EDL (x6) 11.1 • Insert the six (6) Wall Hooks (EDL) into any of the notches in the Wall Panels (either side of the shed). Then push downward to lock them in place.

  • Page 62: Window Installation

    WINDOW PANE INSTALLATION / INSTALLATION DU CARREAU / INSTALACIÓN DE LA HOJA DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIS (x2) ADZ (x4) ADY (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico...
  • Page 63 • En caso de tener problemas con esta sección, seguir el de la hoja (AHE). código debajo para ver un video sobre la instalación en esta sección. http://go.lifetime.com/8wininstall 12.3 12.2 • Insert a screw (ADY) into the hole at the bottom of •...
  • Page 64 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUISE INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) AIS (x2) 12.4 • Attach the two (2) window latches (AIS) at the top corners of the panel opening. •...

  • Page 65: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AIX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 66 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIX (x4) 13.1 • If the doors are not level, follow the steps on this page to even them out. •...

  • Page 67: Shed Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO 5/16" (≈8 mm) Wood Drill Bit Foret à...
  • Page 68 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) FOR A CONCRETE PLATFORM / POUR UNE PLATE-FORME EN BÉTON PARA UNA PLATAFORMA DE CONCRETO 5/16 in/po (≈8 mm) 14.1 • If you plan on anchoring your shed to a concrete platform, you must purchase the correct anchoring hardware. We recommend using a hammer drill, 5/16"...
  • Page 69 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) FOR A WOOD PLATFORM / POUR UNE PLATE-FORME EN BOIS PARA UNA PLATAFORMA DE MADERA 5/16 in/po (≈8 mm) 7/16 in/po (≈11 mm) 14.1 • If you plan on anchoring your shed to a wood platform, you must purchase the correct anchoring hardware. We recommend using a drill, 5/16"...
  • Page 70 NOTES / REMARQUES / NOTAS...

  • Page 71: Cleaning & Care

    Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.

  • Page 72: Registration

    à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...

  • Page 73: Warranty

    This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fi tness for use to extent permitted by Federal and state law. Neither Lifetime Products, Inc., nor any representative assumes any other liability in connection with this product. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

  • Page 74: Garantie De Fabrication Limitée De 10 Ans

    à cette condition et aucun représentant de la société ne peut renoncer à l’application de cette politique ou la modifi er. Ce produit n’est pas destiné à des fi ns institutionnelles ou commerciales; Lifetime Products, Inc. n’assume aucune responsabilité à cet égard. Toute utilisation institutionnelle ou commerciale annule la garantie.

  • Page 75: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor.
  • Page 76 ® AMÉLIORER VOTRE ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU D’AUTRES PRODUITS ® Pour acheter des accessoires ou d’autres produits Lifetime , nous rendre visite à : www.lifetime.com Ou composer le 1-800-424-3865 Du lundi au vendredi 7 h – 17 h (HNR) et samedi 9 h – 13 h (HNR) ®...

Table des Matières