CASUALPLAY Kangur fix Mode D'emploi page 25

Siège-auto
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
system, leaning against the front of it, against the vehicle seat (fig.24).
Place the child in the restraint system.
Take hold of the end of the vehicle seat belt, and pass the abdominal
under the armrests of the safety seat (fig.25).
The diagonal part of the belt should go through the belt guide on the
headrest (fig.26).
Fasten the seat belt and make sure that the seat is secure (fig.27).
REmOving ThE SAfETy SEAT
Unfasten the vehicle seat belt buckle and take it out of the guides on
the safety seat.
Take the child out of the restraint system.
Lastly, take the safety seat off the vehicle seat.
REMOVING THE SAFETY HARNESS
Loosen the safety harness (fig.1).
Find the distribution plate, situated on the backrest, and remove the
chest straps of the harness (fig.28). Pass them through the slots in the
backrest and take the chest pads off (fig.29).
Unfasten the safety harness buckle and extract the crotch strap buckle,
passing the metal part through the slot in the upholstery and the
frame (fig.30).
To fit the safety harness, follow the same steps in reverse.
REMOVING THE UPHOLSTERY
Take the safety harness off.
Remove all the elastic loops that fasten the upholstery to the safety
seat (fig.31-32-33).
To fit it again later, follow the same steps in reverse.
When fitting the harness, make sure that the straps are not twisted.
MAINTENANCE
Clean the plastic parts with mild soap and warm water.
Wash the upholstery and fabric parts by following the washing
instructions printed on the different care labels.
23

Publicité

Table des Matières
loading

Table des Matières