Continuity Test - BEHA UNITEST Hexagon 50 Mode D'emploi

5.3

Continuity Test

Prior to any continuity test, it must be ensured that the resistance
to be measured is not live. Failure to comply with this prescription
can lead to dangerous corporal user injuries or cause instrument
damage. Additionally, foreign voltages falsify the measurement
result.
Position measurement function selection switch to
ment range.
Connect the black test lead to the COM socket and the red test lead
to the
Connect test leads to UUT.
Read the measurement result displayed on the screen.
Acoustic indication by signal sound if resistance < 1000 Ω
socket.
Continuity Test
-
measure-
+
35