Sauder Carson Forge 412924 Mode D'emploi page 6

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-eight HIDDEN CAMS (1F) into the ENDS (A
å
and B), UPRIGHT (C), BACK (G), BRACE (H), and
SKIRTS (M and N). Then, insert the metal end of
twelve CAM DOWELS (2F) into the HIDDEN
CAMS in the ENDS, UPRIGHT, BACK, and BRACE.
Do not insert CAM
DOWELS into these
HIDDEN CAMS.
Arrow
2F
(12 used)
Page 6
Do not tighten the HIDDEN CAMS in this step.
Arrow
(28 used)
1F
H
C
B
A
1F
Do not insert CAM
DOWELS into these
HIDDEN CAMS.
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1743
to watch a video on how to assemble your unit.
N
N
Do not insert CAM
DOWELS into these
HIDDEN CAMS.
G
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
412924
1F
M
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Arrow
www.sauder.com/services
Arrow
Arrow
Hole