Before You Begin
Parts Included
Installation Procedure
Remove any protective film.
1.
Remove the 2 screws shown in the diagram below
2.
and retain for step 3.
Fit the backguard over the range top back side and
3.
affix with the 2 screws removed in step 2 and the
6 screws from the packaging.
4
B e f o r e Y o u B e g i n
I n s t a l l a t i o n P r o c e d u r e
Tools and Parts Needed
Phillips head screwdriver
▯
Gloves
▯