Power Connections - Phoenix Gold Z8150V2 Mode D'emploi

Z Series Slim Active Bass Enclosures
BLACK
WHITE L+ L- WHITE/BLACK
To speaker Terminals
GREY R+
R- GREY/BLACK
of head unit

Power Connections

Connect the ground terminal to the closest point on the chassis of the vehicle.
Keep this ground wire to less than 39" (100 cm) in length. Use 8 gauge
(or heavier) wire.
Connect the remote terminal to the remote output of head unit using 16 gauge
(or heavier) wire.
Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8
gauge (or heavier) cable from this fuse to the amplifier location. Then connect
the fuse holder to the "BATT+" (+12V) connection on the subwoofer rear panel.
Battery
Fuse
to REMOTE TURN-ON terminal of head unit
Chassis ground point
© 2018 Phoenix Gold • www.phoenixgold.com