Auto Power On - Phoenix Gold Z8150V2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Z Series Slim Active Bass Enclosures
Front Panel controls & features
1
2
3
4
5
6
7
8
1. REMOTE LEVEL CONTROL PORT - Attach the included remote level control to adjust the
volume level of the subwoofer independently.
2. INPUT GAIN CONTROL - After you have installed your system, turn this control to
minimum. Turn the head unit on (and the subwoofer will turn on via the
remote connection). Turn the head unit volume to about 75% full level. Slowly turn up the
subwoofer input gain control until you hear a small amount of
distortion. Then reduce the level until the distortion is completely gone. Leave the control
at this setting.
3. SUBSONIC FILTER - Use this control to filter out low frequency noise and
rumble.
4. BASS BOOST - The bass boost feature will increase the sound level in the bass
frequencies.
5. LOW PASS FILTER - This control permits you to define the frequency range you want
the subwoofer amplifier to receive.The subwoofer will reproduce all sound BELOW the
frequency you set. If the rest of your system is weak on the mids, you may wish to set this
control relatively high. If the midrange is well covered by the rest of your system, you will
probably want the subwoofer to only receive lower frequency signal.
6. PHASE - Use this control to help compensate for time alignment problems in the system.
Such problems usually result from having the subwoofer at a
different distance from the listener than the other speakers in the system.

7. AUTO POWER ON

The AUTO POWER ON (ON / OFF) is for high level (speaker-level) connections. When the
switch is in the "ON" position, the subwoofer AUTO POWER ON when there is signal input.
If the amplifier detected no signal input, the amplifier will auto turn off. If you prefer to
use the remote turn on/off connection, the switch is in the OFF position.
8. POWER STATUS LED
The green LED lights up when the unit is powered on and functioning correctly.
Should a problem be detected then the red light will illuminate.
© 2018 Phoenix Gold • www.phoenixgold.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z10150

Table des Matières